EP70
EP70: Special adhesive for mounting cylindrical strain gauges in screws
EP70 two-part adhesive is the first choice for installing cylindrical strain gauges in bolts (LB11 and TB21) for measuring stress, force and vibration. It is heat curable and can be used over a wide temperature range of -40°C to 70°C.
EP70 is particularly easy and safe to handle: bubble formation during curing and air inclusions are no longer a problem.
- Application temperature range: -40°C to 70°C
- Curing temperature: 3h at 60°C
- Optional curing step: If the operating temperature is higher than 50°C, a second curing step at 100°C for 4 hours is required
- Workability: max. 2 hours after mixing
- The adhesive is sufficient for: approx. 50 installations
Package contents: 2x vial of component A, 2x vial of component B, Teflon installation tape
Safety Data Sheets