C2 (N/kN) - pressure force sensor up to 200kN

C2: Hermetically sealed pressure force transducers for static and dynamic applications.

C2 series force transducers are designed for measuring compressive forces. They achieve very high accuracy in measuring static as well as dynamic forces.

The long proven C2 force transducer is a diaphragm design that is very suitable for fast measurements. This transducer has integrated lateral force compensation and works safely even in the event of lateral or eccentric forces.

HBK has redesigned the C2 series of pressure force transducers to respond quickly and optimally to spare parts requirements and new designs. Therefore, different cable lengths, mounted connectors and TEDS are available, allowing for more efficient installation.

In addition to the well-known passive versions of the force sensors, optional versions with integrated electronics and current or voltage output (4-20mA or 0-10V) are now available, while the external dimensions remain unchanged.

---

 

 

Key features:

• HBM accuracy class: 0.1 (500N: 0.2)
• Measuring ranges: 0 ... 500N, 1kN, 2kN, 5kN, 10kN, 20kN, 50kN, 100kN, 200kN
• Nominal temperature range: -10°C ... +70°C
• 2 mV/V output signal
• Degree of protection IP67
• Low overall construction height
• Nominal stroke < 0.1 mm
• Stainless steel body

 

 

Optional (configuration table can be found in the sensor data sheet):

• The sensor adapts optimally to the measurement task
• Variants with integrated amplifier in the sensor body with voltage or current output
• TEDS (Transducer Electronic Data Sheet) on request
• Connector mounting for HBM amplifiers is also available as an additional service.
• Connectors: 15-pin Sub-D, 15-pin Sub-HD, MS3106PEMV, M12 or free ends
• Calibration sheet - paid service on request

 

 

You can also find other accessories in the catalogue:

• For force introduction, such as ball eyes, force introduction attachments or sensor mounting... (depending on sensor type)
• Cables
• Separate connectors
• and others

 

 

A wide range of amplifiers are available (optionally) to process the signal from this sensor to suit your measurement needs:

• ClipX - BM40 series single-channel amplifiers offer high accuracy class, signal processing from many types of sensors (technologies) and a wide range of communication protocols (depending on the design) - PROFINET, EtherCAT®, PROFIBUS, Ethernet/IP™, Modbus-TCP, also analog output - voltage and current (V/mA), digital I/O and Ethernet (TCP/IP); IIoT (Industrial Internet of Things).
• QuantumX - a range of DAQ control panels for a wide range of applications not only in laboratories, from single channel units to hundreds, integration for EtherCAT, CAN, ProfiNet and more. In conjunction with SW catman is a complete measurement chain with the possibility of measuring, processing, storing and exporting data. Drivers for LabVIEW or DIAdem are also available.
• SomatXR - a range of rugged DAQ control panels for "field" use, from units of channels to hundreds, integration for EtherCAT, CAN, ProfiNet and more. In conjunction with SW catman is a complete measurement chain with the possibility of measuring, processing, storing and exporting data.
• PMX - modular DAQ system designed not only for industrial applications from units to dozens of channels, communication protocols CANopen, PROFINET, EtherCAT®, Ethernet/IP™, digital I/O and analog outputs - voltage and current (V/mA), CODESYS, IIoT.
• MGCplus - DAQ system for high number of channels, wide range of inputs and outputs, communication protocols CANbus, PROFIBUS, serial port or analogue outputs.
• MVD2555 a SCOUT55 - single-channel indicators with built-in display for panel integration (MVD2555) or table-top version (SCOUT55), analogue output - voltage and current (V/mA), RS232 or RS485.
• and many others amplifiers for industry a DAQ systems