C10 - Pressure sensor up to 1MN

The C10 multifunctional force transducer is ideal for testing and laboratory applications as well as for demanding tasks in production.

The rotationally symmetrical, low-profile C10 force transducer offers excellent flexibility for benchtop testing as well as for demanding production tasks and laboratory experiments. This transducer is designed for use in pressure dynamic and static tasks where high accuracy is required even under adverse conditions such as large lateral forces, vibration or temperature gradients.

The high resistance of the sensor is guaranteed by its stainless steel body with IP68 protection.

 

Improved accuracy

• Technical improvements (product facelift in 2020)*
• TC0 only 75ppm/10K
• Minimal nonlinearity, low hysteresis and excellent repeatability (0.025%)
• High output signal - up to 4mV/V (from 25kN capacity)
• High resolution due to high gain level

 

---

 

Key features:

• HBM accuracy class: 0.02 ... 0.05
• Measuring ranges: 0 ... 2.5kN, 5kN, 10kN, 25kN, 50kN, 100kN, 250kN, 500kN, 1MN
• Low temperature dependence
• Minimal non-linearity, low hysteresis and excellent repeatability
• High output signal - up to 4mV/V (from 25kN capacity)
• High resolution due to high gain level
• Degree of protection IP64 / IP67 / IP68 (according to DIN EN 60529), corrosion resistant
• EMC-tested
• Aluminium or stainless steel body (from 25kN capacity)
• Vibration resistance

 

 

Optional (configuration table can be found in the sensor data sheet):

• The sensor adapts optimally to the measurement task - more than 2500 sensor design combinations available
• Several connector and cable options
• Version with double strain gauge bridge
• TEDS (Transducer Electronic Data Sheet) on request
• Connector mounting for HBM amplifiers is also available as an additional service.
• Connectors: 15-pin Sub-D, 15-pin Sub-HD, MS3106PEMV, M12 or free ends
• Calibration sheet - paid service on request

 

You can also find other accessories in the catalogue:

• For force introduction, such as ball eyes, force introduction attachments or sensor mounting... (depending on sensor type)
• Cables
• Separate connectors
• and others

 

A wide range of amplifiers are available (optionally) to process the signal from this sensor to suit your measurement needs:

• ClipX - BM40 series single-channel amplifiers offer high accuracy class, signal processing from many types of sensors (technologies) and a wide range of communication protocols (depending on the design) - PROFINET, EtherCAT®, PROFIBUS, Ethernet/IP™, Modbus-TCP, also analog output - voltage and current (V/mA), digital I/O and Ethernet (TCP/IP); IIoT (Industrial Internet of Things).
• QuantumX - a range of DAQ control panels for a wide range of applications not only in laboratories, from single channel units to hundreds, integration for EtherCAT, CAN, ProfiNet and more. In conjunction with SW catman is a complete measurement chain with the possibility of measuring, processing, storing and exporting data. Drivers for LabVIEW or DIAdem are also available.
• SomatXR - a range of rugged DAQ control panels for "field" use, from units of channels to hundreds, integration for EtherCAT, CAN, ProfiNet and more. In conjunction with SW catman is a complete measurement chain with the possibility of measuring, processing, storing and exporting data.
• PMX - modular DAQ system designed not only for industrial applications from units to dozens of channels, communication protocols CANopen, PROFINET, EtherCAT®, Ethernet/IP™, digital I/O and analog outputs - voltage and current (V/mA), CODESYS, IIoT.
• MGCplus - DAQ system for high number of channels, wide range of inputs and outputs, communication protocols CANbus, PROFIBUS, serial port or analogue outputs.
• MVD2555 a SCOUT55 - single-channel indicators with built-in display for panel integration (MVD2555) or table-top version (SCOUT55), analogue output - voltage and current (V/mA), RS232 or RS485.
• and many others amplifiers for industry a DAQ systems

 

Below you can find a presentation video of the HBM C10 sensor.