Configurable services and accessories
BCY01
Archive
Production of BCY01 has been discontinued without direct replacement. Replacements can be made with commercially available activators for cyanoacrylate adhesives. BCY01 is an activator ...
BLC
Archive
Accuracy classes D1, C3. Capacities 550kg, 1.1t and 1.76t. Material stainless steel, protection IP67.
C6A
Archive
Strain gauge pressure force transducer class 0.5, rated range 0 to 200kN ... 5MN, strain gauge full bridge 2mV/V, IP67.
C9C - miniature pressure sensor up to 50kN
Digital measurement chains (IO-Link, CAN, RS485,..), Force sensors
Class 0.2 strain gauge force transducer, miniature design, rated range 0 to 50N ... 50kN, strain gauge full bridge 1mV/V.
CLIP (AE101, AE301, AE501)
Archive
Amplifiers from this series are no longer available. For possible replacements, see the article on possible replacements. Clip - The cheap and perfect solution for measuring into the ...
DA2510
Archive
The indicator is no longer supplied. For possible replacements, please refer to the industrial amplifiers section. DA2510: Digital indicator for panel mounting. Key Features ...
digiCLIP (DF30.../DF31...)
Archive
DigiCLIP amplifiers are no longer available. An alternative is the ClipX amplifier. Do you want to measure force, mass, moment of force and pressure in a state-of-the-art way? ...
EP150
Archive
Production of EP150 adhesive has been discontinued. EP150: Epoxy resin-based adhesive for bonding strain gauges EP150 is ...
FIT5X - digital load cell up to 20kg
Digital measurement chains (IO-Link, CAN, RS485,...), Digital load cells, Single point sensors
Digital load cells FIT5X: Not only for rotary filling machines The FIT5X strain gauge load cell is equipped with advanced electronics and works both ...
HBM calibration laboratories (calibration)
Calibration
HBM Calibration Laboratories: Your key to accurate results Accuracy, mutual acceptance and to your requirements.
Cables - metrage
Accessories, Wires, soldering and installation kits
Cables and wires for strain gauge bridge wiring We offer cables, wire leads and wires that are suitable accessories for wiring sensors and t ...
KMR
Archive
Force gauge washer for measurement in the axis of bolted connections, rated range 0 to 20 ... 400kN, strain gauge full bridge, IP67 protection.
Connectors
Accessories
Overview of the most commonly used connectors. SUB-D, SUB-HD, MS3106PEMV and others.
LCMC - weighing chain
Digital measurement chains (IO-Link, CAN, RS485,...), Digital load cells, Bending load cells, Single point sensors, Weight amplifiers and electronics, Amplifiers for industrial use
Load Cell Measurement Chain (LCMC) - Intelligent Customizable Weighing Chain Create a customized LCMC digital weighing chain with optional com ...
MC2A/MC3
Archive
Amplifiers from this series are no longer available. For possible replacements, see the article on possible replacements. The MC2A/MC3 are attractively priced rugged amplifiers ...
MVD2510
Archive
The MVD2510 amplifier is no longer available. Alternatives are the WTX110 or MVD2555. The MVD2510 is a good candidate for applications in industrial weighted ...
P15
Archive
Sensor for static and dynamic relative pressure measurements of liquids and gases with a favourable price/performance ratio.
PACEline CMD
Archive
Amplifiers from this series are no longer available.CMA series amplifiers can be substituted. PACEline CMD digital charge amplifier: for signals from 50 pC to 2 ...
PW15AHi
Archive
Digital single point encoder for dynamic weighing - RS485, CANOpen, DeviceNet, capacities 10kg - 50kg, C3 according to OIML R60, platform up to 500x400mm, stainless steel, kr ...
PW27/PW27P
Archive
Accuracy classes: C3MR according to OIML R60, platform up to 400x400mm, capacities 10kg, 20kg, material stainless steel surface doped with silver, protection IP67, IP68/IP69K, ase ...
RM4220
Archive
The RM4220 amplifier is no longer available. An alternative is the ClipX amplifier. RM4220: Amplifier for strain gauge sensors with current output signal 4. ...
SK ring collectors (SK5, SK6, SK12)
Archive
The SK5, SK6 and SK12 ring collectors transfer the measurement signals from the rotating sensor to the stationary measuring system. The production of the ring collectors was completed ...
SL450
Archive
SL450 is a hot cure silicone resin coating designed for high temperature environments. SL450 has been discontinued. The replacement m ...
SLS
Archive
SLS is a hanging scale specially designed for weighing patients. Sales of the SLS indicator have been discontinued without replacement. The SLS is a scale with an integrated indicator ...
Shielded cables CABA1, CABA2, CABE2
Accessories, Accessories for weighing systems
Shielded cables for sensors, scales and strain gauges.
T12
Archive
The sensor is no longer supplied. The T12HP sensor is offered as a possible replacement. T12 sensor: high accuracy, dynamics and resolution. One sensor performing multiple functions ...
T20WN
Archive
The sensor is no longer supplied. The T21WN sensor is offered as a replacement. The T20WN torque sensor is specially designed for measuring static and dynamic ...
T21WN
Archive
The T21WN type sensors are no longer manufactured. T210 type sensors are a direct replacement. The T21WN torque transducer is specifically designed for measuring static ...
T4A
Archive
The ring collector force torque transducer is specifically designed to measure static and dynamic force torque while monitoring production and ensuring its ...
TEDS - electronic sensor identification
Accessories
TEDS: Plug and measure with digital electronic data sheet directly in the sensor. The TEDS (Transducer Electronic Data Sheet) allows you to simply plug and play ...
U1A
Archive
Strain gauge sensor for tensile and compressive force class 0.1, nominal range 0 to 10 ... 50N, strain gauge full bridge 2mV/V, protection IP40.
U5
Archive
Low-profile strain gauge sensor for tensile and compressive force class up to 0.1, rated range 0 to 100 ... 500kN, strain gauge full bridge 2mV/V, IP65 protection.
U93 - miniature rugged force/pressure transducer up to 50kN
Archive
Strain gauge sensor for tensile and compressive force, compact design, flange mounting, rated range 0 to 1kN ... 50kN, strain gauge full bridge 0.5 ne ...
U93A - Strain gauge force transducer up to 50kN
Digital measurement chains (IO-Link, CAN, RS485,..), Force sensors
U93A miniature force transducer: miniature tensile and compressive force transducers for flange mounting The small, robust and very rigid U93A reliably measures the stat ...
U9C - miniature tension/pressure transducer up to 50kN
Digital measurement chains (IO-Link, CAN, RS485,..), Force sensors
Tensometric tensile and compressive force sensor class 0.2, miniature design, rated range 0 to 50N ... 50kN, strain gauge full bridge 1mV/V.
WE2111
Archive
Production of the WE2111 indicator has been discontinued. As an alternative we offer a new series of indicators WTX110-A or WTX120. WE2111 is an indicator developed for maximum ...
X120
Archive
X120 adhesive is no longer available. X120 is an adhesive designed for fiber optic installation, especially OptiMet PKF. The adhesive is quick and easy to use. The ...
Z70
Archive
Z70 glue is no longer produced. The direct replacement is CA80. Z70 is a one-component, cold-curing, cyanoacrylate-based adhesive. Curing ...