Foil strain gauges and accessories
ABM75 - Al foil with sealant for covering strain gauges
Protective coverings, varnishes
HBM's ABM75 is a strip of high-adhesion sealant (3 mm) with an aluminium foil (0.05 mm) to protect strain gauge applications. It is recommended to use aluminum ...
AK22
Protective coverings, varnishes
AK22 is a high-adhesion masking sealant for the protection of strain gauge applications. The AK22 sealant does not harden, therefore there is no unwanted exposure over time to ...
CA80 - quick drying adhesive for strain gauges
Adhesives and bonding material
Fast drying, single component, room temperature curing CA80 adhesive not only for experimental testing with strain gauges. Thanks to the extremely ...
Cleaning tampons
Cleaning material
Cleaning swabs for cleaning surfaces during strain gauge application. Cellulose cleaning swabs are supplied in a 5 cm x 5 cm format. The contents of the bale ...
DY (parallel linear)
Y series
DY strain gauges with 2 parallel measuring grids for measuring the bending stress of beams. DY strain gauges consist of two measuring grids that are ...
EP310N
Adhesives and bonding material
EP310N is a two-component epoxy resin based adhesive. EP310N is close to water in consistency and is therefore only suitable for non-porous surfaces. For ...
EP70
Adhesives and bonding material
EP70: Special adhesive for mounting cylindrical strain gauges in bolts Two-component adhesive EP70 is the first choice for installing cylindrical strain gauges in ...
Foil strain gauges for sensor manufacturers
For sensor manufacturers
Foil strain gauges for sensor manufacturers. HBM foil strain gauges for sensor manufacturers are offered in many variants. With many years of experience in ...
Installation kits for strain gauge application
Adhesives and bonding material, Residual voltage measurement, Protective coatings, varnishes, Wires, soldering and installation kits, Cleaning material
The strain gauge application kits contain all the necessary resources and tools for the application of foil strain gauges.
Cables - metrage
Accessories, Wires, soldering and installation kits
Cables and wires for strain gauge bridge wiring We offer cables, wire leads and wires that are suitable accessories for wiring sensors and t ...
KFU - strain gauges for high temperatures
M, C and special series
KFU high temperature strain gauges: for temperature ranges up to +350°C The KFU series of strain gauges is the ideal choice for testing at extremely high temperatures ...
KY (chains)
Y series
KY type strain gauge chains are mainly used for strain gradient measurements. Strain gauge chains of types KY1, KY2, KY3, KY4, KY5, KY6, KY7, KY8 and ...
LB11 / TB21
M, C and special series
LB11 & TB21: Strain gauges for measuring in bolts Bolts are a common structural element used to mechanically connect various components. The series in ...
LY (linear strain gauges)
Y series
LY: Linear strain gauges with one measuring grid The LY series is the first choice for strain measurement in one direction. With a range of LY1, LY2, LY4, LY5, LY6 ...
Miniature strain gauge rosettes for PCB measurements
Foil strain gauges, PCB strain gauges, Cable mounted strain gauges
Due to their minimal size, RF9 strain gauges are particularly suitable for PCB measurements and other locations where small strain gauge size is a consideration.
NG120
Protective coverings, varnishes
NG120: Covering material for strain gauges - Nitrile rubber Nitrile rubber NG120 is a brown, one-component covering material in a tube designed to protect installations ...
NG150
Protective coverings, varnishes
NG150 is a one-component lacquer for strain gauge applications containing nitrile rubber that cures at room temperature. NG150 cannot be used in combination with ...
P250
Adhesives and bonding material
P250: Ready-to-use adhesive for strain gauge installations P250 is a ready-to-use phenolic resin based adhesive. It cures in ...
Soldering points for connecting strain gauges
Wires, soldering and installation kits
Soldering points simplify the connection and soldering of strain gauges that must be soldered to the connection wires. These soldering points are used between the connecting ...
PU140
Protective coverings, varnishes
PU140 is a one-component polyurethane-based topcoat that can be cured at room temperature. The main advantages of PU140 are its high elastic ...
C Series (extreme temperatures)
M, C and special series
C-Series strain gauges are designed for use at extreme temperatures. The use of special materials in the manufacture of the C-Series strain gauges has made it possible to ...
M series (high cycling endurance, large temperature range)
M, C and special series
M Series strain gauges for high cyclic loading and large temperature ranges. M Series foil strain gauges are designed for high cyclic loading, e.g. ...
RELEASEFILM
Adhesives and bonding material
RELEASEFILM fluoropolymer separation film. 33 m (108 ft) long fluoropolymer separation film on a spool is suitable for cold curing and hot ...
RMS1
Cleaning material
RMS1: surface cleaner for strain gauge application. For quality strain gauge applications, it is necessary to ensure also a good chemical cleaning of the site before applying t ...
RMS1-SPRAY
Cleaning material
RMS1-SPRAY: Cleaning surfaces when applying strain gauges now takes significantly less time thanks to an easy-to-use spray cleaner. RMS1-SPRAY ...
RY (rose)
Y series
The RY strain gauges are a suitable choice for the analysis of biaxial strain with unknown principal strain directions. RY-type rosettes always contain 3 measuring ...
SG250
Protective coverings, varnishes
SG250 is a transparent one-component silicone rubber without any solvents. SG250 needs only humidity for curing. During curing ...
Sint MTS3000 Restan - residual voltage measurement
Residual Voltage Measurement
System for automatic residual stress detection by drilling method according to ASTM E837.
Strain gauges fitted with cables
Foil strain gauges and accessories, Cable mounted strain gauges
Leave the soldering to HBK and avoid a potential source of error by ordering pre-soldered strain gauges. Strain gauges are in central stock in Europe.
Conductors for foil strain gauges
Wires, soldering and installation kits
HBM conductors are available in several versions. The following conductors are available: Copper coated conductor 0.04 mm2 25 m coil Temperature resistance ...
VY (full bridge)
Y series
VY: Foil strain gauge with 4 measuring grids connected to a solid bridge. The VY strain gauge consists of four measuring grids connected in a full ...
X280
Adhesives and bonding material
X280 is a two-component epoxy resin based adhesive. X280 is cold curable, easy to use and can be processed at minimal cost ...
X60
Adhesives and bonding material
X60 is a 2-component fast curing adhesive, consisting of a liquid component (B) and a powder (A component). The dosage of X60 is very simple - ...
XY (T rosette)
Y series
XY T rosette with 2 measuring grids for biaxial mechanical stress analysis. XY T rosette strain gauges, which have 2 measuring grids arranged with 90 ...
XY2/XY4 (krut/smyk)
Y series
XY2 and XY4 torsion/shear strain gauges with 2 measuring grids for torsion bar measurements and shear stress measurements. The XY2 and XY4 series strain gauges have a grid ...